Activity


  • McGuire Morris posted an update 4 months ago  · 

    An enhancing molding can be explained as any continuous projection that is used to enhance the look of a wall. In ancient Greece, these were first employed to throw water outside the wall. The contours, measurements, and projections of moldings vary greatly.

    Frieze

    Wedding party molding – the frieze (or frieze board) – was basically used on the Parthenon in the Acropolis. The frieze is known as a part of the Greek architectural style.

    The Parthenon was built for the goddess Athena. The frieze moldings that have been used were supposed to tell the storyline of her conquer Poseidon in succeeding as the patron from the ancient city which can be now Athens.

    The frieze panels can be a group of designed pediments which are stuffed with the photos of Athena’s birth and rise to power. Today, a frieze board will be the flat panel just underneath a crown molding or cornice. Often, low relief is applied to this panel for additional decoration.

    Today, frieze moldings are most typical like a part of a decorative molding that follows the neoclassical architecture or decorating style.

    You want a pretty high ceiling (a minimum of 9 feet), and best if you stain or paint the frieze and also the crown molding the identical color. The frieze is an excellent way to visually bring the ceiling down and make the area appear cozier.

    Crown Molding

    Crown molding is regarded as the popular sort of cornice molding. Crown molding is commonly a single-piece of decorative molding, installed on top of a wall, with an angle for the adjoining ceiling. However, I have seen crown molding assemblies of 5 or maybe more pieces in elaborate settings.

    Crown molding often carries a profile that projects out on the ceiling and along the wall, adding a refreshing appearance to a room. It is often used near the top of cabinets or built-in furniture.

    Introducing this sort of decorative molding with a not at all hard room supplies a historic character that the room wouldn’t otherwise have. Crown molding is additionally in combination with other moldings to add details to fireside mantels and shelves. (For which it’s worth, this could be the best architectural feature).

    Crown molding can be a kind of Cornice Molding. The definition of "cornice" describes molding installed across the top of a wall or above from the. If this therapy is created from multiple bits of molding, it is called a "build-up cornice." One other kind of cornice molding is the Cove Molding.

    Cove Molding

    Cove molding is extremely just like crown molding, with the exact same application and performance. The main difference forwards and backwards is within the profile. Cove molding includes a concave profile (which bows inward) while crown molding carries a convex (outward) profile.

    While crown is most in your house in traditional settings, Cove moldings are equally comfortable in country, and even contemporary settings. You don’t normally see multi-piece assemblies of cove moldings. You’ll be able to occasionally notice "beaded" at upper and lower for any little accent.

    Entries, formal living spaces, formal dining rooms, and master bedrooms usually receive decorative moldings with ornate or traditional patterns.

    Kitchens as well as other more functional areas of the home could be in which you will discover the greater form of the cove molding. Through the years, coves and crowns are becoming more compact, most still bear the styles and shapes from the original Greek and Roman designers.

    Chair Rail Molding

    A chair rail can be a decorative molding that divides a wall horizontally, usually about 32" to 36" over the floor. They protect the walls in locations damage might occur from people getting up from chairs.

    That is why, the more traditional chair rails will have a nosing inside the center, with curved and beveled surfaces that taper returning to the wall above and under the nosing.

    Today, chair rails remain a common detail in traditional interiors. They serve the decorating aftereffect of unifying the many architectural specifics of a room, including window and door trim, and fireplace surrounds.

    Chair rail doubles like a cap for wainscoting or any other wood paneling. This decorative molding adds a feeling of detail and charm while achieving continuity inside a room by unifying the various decorative elements.

    Panel Molding

    Panel molding, commonly called a picture frame molding, seems like a big empty frame, and is often section of designs on walls of old Colonial and, Georgian, and Early American homes. The location of the molding needs to be across the chair rail height leading to 10 to 12 inches down from the ceiling.

    How big this type of decorative molding, measuring 1" to 3" wide, should be proportionate on the ceiling height from the room. Just like the other moldings, panel molding adds feeling of charm and delicate detail to a room.

    Wall framing appears with the Georgian period of American architecture, when plaster started to replace wood panels about the walls. Panel molding is also a great way to divide walls into large, aesthetically pleasing units, with no same cost of full wall paneling.

    Another putting on this versatile molding is usually to trim openings produced by wider planks that are assembled as rails and fashions. Often, the centers of those frames stay open. By applying panel moldings round the perimeter in the opening, you create the feel of an image frame.

    When this decorative molding is painted inside the same color because surrounding walls, you use a sculptural quality with a wall, adding texture and shadows. If moldings are painted in contrasting colors, they’re able to develop a striking animations appearance, giving depth and dimension. This type of therapy is popular for staircases and entries.

    Baseboard & Base Molding

    Baseboard molding protects the bottom of the wall from ware and tear, while hiding openings along with other irregularities the location where the wall meets the ground. Base moldings provide floor line an increased profile, and is as elaborate or simple as you want.

    Whereas it really is easy to setup chair rail on a level plane, baseboard (like crown) can be tricky if your floors (or ceilings) are certainly not level. For this reason, I would recommend getting a professional woodworker for that installing these moldings.

    As you remedy to uneven floors, you can purchase a "shoe molding" across the bottom front edge to get the baseboard a finished look. Something different you’re able to do with baseboard (as well as using the toe kick of one’s kitchen cupboards) is incorporate accent lighting.

    This is simply not commensurate with the pure traditionalist, but it’s a reasonably nifty approach to have accent lighting throughout the perimeter of an room. You could not make this happen until they come up with small LED rope lights nowadays.

    Rope lights appear in different lengths and colours, and could be easily installed behind baseboard. Simply make a notch from the back side of the baseboard, at the pinnacle, and run the rope lights in to the notch.

    This really is more often employed in commercial spaces, but may be included entries and hallways – specially in contemporary homes.

    Flexible Moldings

    For those who have a curved wall or arch, you can sure enough have a good craftsman create a curved molding for approximately Three times the expense of a straight molding. Or, you can purchase a flexible molding for around a similar price since the straight one.

    These allow you to install moldings onto curved surfaces or arches, devoid of the delay and worth of getting them to produced from wood. The stock profiles (there are hundreds) is the same towards the rigid versions and they’re compatible in terms of paint finish can be involved.

    For more details about
    phao chi pu view this site.