Activity

I installed the bumper. It went fairly smooth with a couple of issues to figure out. After speaking with Trailready, apparently I have the very first Trailready Winch bumpers for a 2015 Chevrolet 3500. Since I was the test subject, the instructions were not up to date for my application. Good thing I can figure things out.

I removed the stock bumper in this order:
1) Remove all of the plastic pop rivets securing the plastic shield above the grill, under the hood.
2) Remove the 4 bolts securing the top of the grill.
3) Use firm, but controlled pulling to pop the grill out of its clips along the front of the truck.
4) Now you have access to the bolts securing the bumper from the top. Remove 4 from the top and 2 from the bottom.
5) Disconnect the wiring under the bumper, which is a single plug on vehicles equipped with front fog lights and park sensors.
6) The entire bumper will slide off pulling from the front.